Friday, 17 August 2012

Mitsubishi Shogun Vehicle: Bitron Testimonial

Mitsubishi Shogun Front.
BITRON TESTIMONIAL #1 From the UK

Mitsubishi Shogun rear
Hi Alex. Thanks for getting in touch. I hope this message finds you and yours in the best of health. Apologies for the delay in getting back to you but I've been exceptionally busy with work recently.

Well, where to start with Bi-Tron? The results I've been getting from this product are truly amazing. I've broken down the results according to my vehicles. As always, I'm happy for you to use my testimonials. I've also attached some pictures of my Bi-Tron treated vehicles.
  Haseeb UK

Vehicle: Mitsubishi Shogun (Pajero)
Engine: 3.0 V6 24v (6G72)
Gearbox: Auto
Fuel: Petrol
I purchased this vehicle about a month ago to trailer my track car. The day I bought the vehicle I drove it home, 170 miles, and averaged 20 MPG (38 litres of fuel used). This was 95% motorway (highway) miles at an average speed of 70 mph using cruise control. After lifting the bonnet (hood) I noticed that the vehicle was noisy and running quite hot, especially the power steering fluid which was black in colour! It looks like it has never been changed.
A few days later I added the following quantities of Bi-Tron without changing any of the lubricants or fluids:
Engine: 236 ml - 5.1% of capacity (4.6 l)
Gearbox: 136 ml - 1.8% of capacity (7.5 l)
Power Steering: 100 ml - 8.3% of capacity: (1.2 l)
Fuel Conditioner: 150 ml to 112 litres of petrol
I drove the vehicle, the following weekend, over a mixture of mainly motorway and some town driving and almost immediately noticed that the car was running cooler and smoother. For around 80 miles of this journey I switched to four wheel drive due to adverse weather conditions and also drove at a much higher RPM than the first run without Bi-Tron. I acheived just over 23 MPG (570 miles from 112 litres of fuel). An improvement of 15% in fuel economy, running at higher speeds and more stress on the vehicle (four wheel drive) than previously and only having added only a minimal quantity of Bi-Tron! The vehicle feels more powerful than before and holds onto gears longer on 100% throttle. In my mind, there is no doubt the economy would be improved even further with a full vehicle service including fluid and lubricant change on both differentials, transfer box and power steering adding the recommended Bi-Tron quantities.
BEFORE & AFTER MPG RESULTS:
Before: 20 MPG (170 miles from 38 l of fuel)
After: 23 MPG (570 miles from 112 l of fuel)
15% increase in fuel economy
Noteable increase in power and smoothness

posted by Alex W Fraser
jars924 @ me.com      866 517 2113
Courtenay, BC  8/17/12
http://freegas.bitronglobal.com/about_bitron.html
 follow me on FACEBOOK would you add me as a friend   on Facebook

Monday, 13 August 2012

Tri-wash how to use

How to use

Hand Use Directions:

Bi-Tron Tri-Wash Waterless Car Wash1. Apply Bi-Tron Tri-Wash to a cool, dry surface in a shaded area if possible.
2. Use two soft, clean terry cloth towels... one for cleaning/polishing and one for buffing.
3. Spray a generous coat of Bi-Tron Tri-Wash on a small section of vehicle (2-3 sq. ft.), spraying with a broad sweeping motion where possible.
4. On windows, apply a light coat.
5. With moderately firm pressure, rub Bi-Tron Tri-Wash thoroughly over the sprayed area until the filmy haze that appears almost disappears.
6. Buff the remaining haze to a high gloss with second terry cloth towel.

Electric Buffer Directions:

1. Use a conventional or orbital-type buffer equipped with a foam polishing pad. (Do not exceed 2,400RPM)
2. Apply Bi-Tron Tri-Wash as described in step 3 above.
3. Immediately buff sprayed area to a high gloss.
4. Continue, section by section, until all accessible areas have been buffed.
5. Polish any remaining areas by hand, if necessary.

After Application Care:

You do not need to re-apply Tri-Wash to touch-up or dust off your vehicle. If the surface is soiled, not just dusty, then reapplying the Tri-Wash is advised using above directions. For a touch-up you'll need two soft terry cloth towels. Wet one with water until it is almost dripping, then lightly run over the area to be cleaned. DO NOT APPLY A LOT OF PRESSURE. The dirt and water will not stick to the Tri-Wash on the surface. Now take the dry towel and lightly buff the area dry. That exclusive Tri-Wash shine will be immediately restored! If your car is extremely dirty with mud, pebbles, or any other foreign matter remove it from the surface with care.
A single 32oz/946ml bottle of Bi-Tron Tri-Wash & Protective Glaze will clean, polish and protect up to 16 vehicles or wash your car without water up to 16 times.

Your cost per waterless wash = $2.75

You can save even more by buying at wholesale prices by becoming a Natureline Preferred Customer!
follow me on facebook

posted by
Alex W Fraser
Courtenay, BC
866-517-2113
http://freegas.bitronglobal.com